Artelia is hiring: 3 HVAC, fluids and BIM roles in Crolles, France

Artelia, the engineering group, is recruiting three people in Crolles, France for clean-room projects in the microelectronics sector. The roles were posted on 3 and 13 November 2026 on Artelia's official SmartRecruiters careers page, with no closing date shown.

The role

The roles join a multidisciplinary project team of more than 100 people on the client's site, covering design, supervision and BIM production. Each role links to its own official page.

• Projeteur / Projeteuse BIM Fluides: a BIM drawing role under the BIM coordinators, modelling complete HVAC, electrical and process fluids systems in Revit to execution level and joining continuous clean-up of clashes. The page asks for at least 5 years of Revit modelling with an industrial focus and a two or three year technical qualification.
• Ingénieur / Ingénieure HVAC suivi de travaux - Industrie: works-supervision engineer for the clean-room extension, checking contractors' execution studies, following site works through to acceptance and supporting testing and commissioning. It is a site-based permanent contract (CDI de chantier). The page asks for a five-year degree and at least 3 years supervising HVAC works, ideally in industrial, pharmaceutical, microelectronics or clean-room settings.
• Ingénieur / Ingénieure chef / cheffe de projet fluides - industrie: leads engineering teams from studies through procurement and works on clean-room projects in France and abroad, with weekly travel in Europe. The page asks for an engineering-school degree and experience as a specialist moving into project leadership; Italian is a plus.

About the employer

Artelia describes itself as an engineering group active in buildings, water, energy, industry and mobility, owned 100 percent by its employees, with more than 10,000 staff in over 40 countries. The BIM fluids designer page says the Crolles team designs fluids and clean rooms for large clean-room projects in France and Europe, modelled in detail to execution level.

Guidance for applicants

These are suggestions from the ConstruBIM editors, not requirements set by the employer.

• For the BIM role, show Revit models of HVAC or process fluids with supports and equipment modelled to execution level.
• Mention point-cloud work: the page lists Scan to BIM conversion as part of the job.
• For the supervision role, describe clean-room or pharmaceutical HVAC works you have inspected and handed over.
• Write your application in French if you can, and state your English level, since the pages ask for professional English.

How to apply

Apply through the official page of each role in the list above. The employer's page shows no closing date, so apply early. ConstruBIM is not the employer and takes no part in the hiring.

Image: View of Grenoble from the Bastille, in the Auvergne-Rhone-Alpes region. Photo: PiRGoif, CC0, via Wikimedia Commons.